Порядок действий по выполнению лабораторной работы №3 по мат.физике для магистров
Перенос чертежей из AutoCAD в MS Word
Подробности
Просмотров: 118961
Введение
Не первый год пытаюсь адекватно перенести чертежи из AutoCAD в Word, так чтобы и веса линий, и кириллический текст отображались должным образом. И еще одно условие, чтобы все линии и размеры были без ярко выраженных пикселей. Первоначально опишу что получится используя тот или иной способ, в конце расскажу про самый верный, где все условия выполняются на отлично. Чертеж был выполнен во вкладке "Модель".
Способы "Копировать - Вставить"
Способ №1.
Выделить необходимы чертеж в автокаде, копировать, вставить в ворд, используя обычную вставку (ctrl + v).
Получили:
Форма картинки соответствует форме вашего экрана. То есть чертеж придется подрезать.
Если кликнуть на рисунке 2 раза, то чертеж откроется в автокаде с возможностью редактирования.
Все веса линий отображаются тонкими
Искажения окружностей (эллипсы)
Способ №2.
Выделить необходимый чертеж в автокаде, копировать, вставить в ворд, используя специальную вставку (ctrl + alt + v), в которой выбрать "Вставить как: AutoCAD Drawing".
Получили результат аналогичный предыдущему.
Способ №3.
Выделить необходимы чертеж в автокаде, копировать, вставить в ворд, используя специальную вставку (ctrl + alt + v), в которой выбрать "Связать как: AutoCAD Drawing".
Получили что-то подобное, что и в способе 2, только в данном случае, если у вас этот чертеж есть на вкладке "Лист", то получится изображение листа на сером фоне, причем с возможностью редактирования. Так как наш чертеж создан лишь во вкладке "Модель", то отображается рисунок на белом фоне.
Способ №4.
Выделить необходимы чертеж в автокаде, копировать, вставить в ворд, используя специальную вставку (ctrl + alt + v), в которой выбрать "Вставить как: Рисунок (метафайл Windows)".
Получили:
Отображается как рисунок, то есть редактировать нельзя
Веса линий меньше 0.3 отображаются тонкими линиями.
Способ №5.
Выделить необходимы чертеж в автокаде, копировать, вставить в ворд, используя специальную вставку (ctrl + alt + v), в которой выбрать "Связать как: Рисунок (метафайл Windows)".
Получили результат аналогичный способу 1.
Способ №6.
Выделить необходимы чертеж в автокаде, копировать, вставить в ворд, используя специальную вставку (ctrl + alt + v), в которой выбрать "Вставить как: Точечный рисунок".
Получили:
Отображается как рисунок, то есть редактировать нельзя
Веса линий меньше 0.3 отображаются тонкими линиями.
Фон соответстсвует фону модели (по умолчанию черный)
Сильные искажения изображения (неровности линий, надписей и т.д.)
Способы "Файл - Экспорт" (в среде AutoCAD)
Способ №7.
Экспортируем чертеж в формате Метафайл (*.wmf). В Word'е "Вставка - Рисунок"
Получили:
Отображается как рисунок, то есть редактировать нельзя
Веса линий меньше 0.3 отображаются тонкими линиями.
Способ №8.
Экспортируем чертеж в формате Encapsulated PS (*.eps). В Word'е "Вставка - Рисунок"
Получили:
Все линии тонкие
Чертеж редактировать нельзя
Способ №9.
Экспортируем чертеж в формате Растровые файлы (*.bmp). В Word'е "Вставка - Рисунок"
Получили:
Отображается как рисунок, то есть редактировать нельзя
Веса линий меньше 0.3 отображаются тонкими линиями.
Фон соответстсвует фону модели (по умолчанию черный)
Сильные искажения изображения (неровности линий, надписей и т.д.)
Остальные типы файлов не поддерживаются MS Word.
Способы "Печать в файл" (в среде AutoCAD)
Данные способы заключаются в том, что вы, заходя в печать ("Файл - Печать"), выбираете необходимый принтер и печатаете в различных форматах (pdf, jpeg, png, tif, eps и т.д.)
Способ №10. Использование виртуального плоттера от Adobe Illustrator
Для данной операции вам понадобится программа Adobe Illustrator, не обязательно новой версии, можно хоть 10.
Порядок работы:
В среде AutoCAD выбираем "Файл - Диспечер плоттеров". В открывшемся окне запускаем "Мастер установки плоттеров".
Нажимаем Далее
Далее
Производители: Adobe, Модели: PostScript Level 1 и жмем Далее
Далее
Выбираем Вывод в файл и жмем Далее
Задаем Имя плоттера (любое, например, Ворд) и жмем Далее
Готово
В среде AutoCAD выбираем "Файл - Печать". В открывшемся окне в графе Принтер - Имя выбираем созданный принтер (Ворд). Печатаем в файл, нажав Ок.
В среде Word выбираем "Вставка - Рисунок".
Получили:
Вес линий соблюден (даже толщина 0.05)
Искажений нет
Геометрия соблюдена
Фон отсутствует
Отображается как рисунок, то есть редактировать нельзя.
В самом ворде отображается не очень красиво. Чтобы это исправить, открываете файл в самом Adobe Illustrator, копируйте чертеж и вставляйте в Word. Выглядит идеально!
Способ №11. Использование встроенного принтера DWG To PDF.pc3
Способ добавлен 29.10.2011 г.
Выражается благодарность пользователю 658144_Евгений, который предложил чертеж печатать в формате pdf. Ниже предложен вариант без установки дополнительных принтеров, как рекомендовалось в комментариях и простой, в отличии от способа №10.
Для данного способа нам понадобится программа STDU Viewer. Она бесплатна для некоммерческого использования, т.е. только для дома.
Порядок работы:
В среде AutoCAD нажимаем на кнопку "Печать"
Выбираем принтер DWG To PDF.pc3
Выбираем нужный формат листа, если в Word нужно вставить не рисунок, а чертеж с рамкой, например. Если рисунок, то формат любой.
Выбираем область печати. Обычно это рамка. Нажимаем на кнопку "Рамка<", после чего выбираем нужный фрагмент чертежа.
Нажимаем на ОК
Выйдет окно для сохранения файла в формате pdf
Открываем полученный файл через программу STDU Viewer.
В появившимся окне выбираем тип файла (Обычно gif весит меньше)
Задаем разрешение (100 DPI хватает с головой)
Указываем какие страницы и куда сохранить, нажимаем ОК
В среде Word выбираем "Вставка - Рисунок"
Получили:
Вес линий соблюден (даже толщина 0.05, причем линия 0.00 оказалась равносильна 0.20, хотя на работе она тоньше 0.05 (вывод - зависит от принтера))
Искажений нет
Геометрия соблюдена
Фон отсутствует
Отображается как рисунок, то есть редактировать нельзя.
В ворде отображается правильно (с толщинами и геометрией).
Заключение
Таким образом, проделав описанные выше действия, можно сделать вывод, что самый лучший результат получается в способе №11. Минусов способа, для его качества и относительно других вариантов, не обнаружено.
Стоит отметить, что помимо описанных 11 способов, в интернете можно найти еще огромное количество вариантов. Как привило, они получаются либо со сторонними программами, либо с работой на виртуальных принтерах. В любом случае, выбор за вами. Успехов!
Spot on with this write-up, I seriously think this website needs a lot more attention. I'll probably be back again to read through more, thanks for the info!
Good day! Would you mind if I share your blog with my facebook group? There's a lot of people that I think would really appreciate your content. Please let me know. Cheers
Hi there, just turned into aware of your weblog via Google, and found that it's truly informative. I'm gonna watch out for brussels. I will appreciate for those who continue this in future. Numerous other people will probably be benefited from your writing. Cheers!
Hi, Neat post. There is a problem together with your site in internet explorer, would test this? IE still is the marketplace chief and a large component of folks will omit your fantastic writing because of this problem.
This is the perfect web site for anyone who wishes to understand this topic.
You know so much its almost hard to argue with you (not that I actually will need to?HaHa). You certainly put a brand new spin on a topic that's been discussed for years. Great stuff, just excellent!
Wonderful blog! I found it while searching on Yahoo News. Do you have any suggestions foot pain on top of foot: .../What-Are-Hammertoes how to get listed in Yahoo News?
I've been trying for a while but I never seem to get there! Thanks
Hello there! This post could not be written much better! Looking at this post reminds me of my previous roommate! He continually kept talking about this. I will send this article to him. Pretty sure he'll have a good read. Thank you for sharing!
We are a gaggle off voluynteers and starting a brand new scheme in our community. Your site provkded us with useful information to work on. You've done an impressive process and our entire neighborhood will probably be grateful tto you.
Hi there, I discovered your web site by way of Google while searching for a similar matter, your site got here up, it seems to be good. I've bookmarked it in mmy google bookmarks. Hello there, simply become aware of your blog via Google, and found that it's really informative. I'm gonna be careful for brussels.
I'll be grateful in the event you continue this in future.
A lot of other folks will likely be benefited out of your writing. Cheers!
Fantastic items from you, man. I have remember your stuff previous to and you are simply extremely fantastic. I actually luke what you've got here, certainly like what you're saying and the way in which you are saying it.
You are making it enjoyable and you continue to care for to stay it sensible. I can't wait to learn far more from you. That is actually a tremendous site.
My coder is trying to convince me to move to .net from PHP. I have always disliked the idea because of the expenses. But he's tryiong none the less. I've been using WordPress on several websites for about a year and am worried about switching to another platform. I have heard very good things about blogengine.net. Is there a way I can transfer all my wordpress content into it? Any kind of help would be really appreciated!
This is very interesting, You're a very skilled blogger. I have joined your rss feed and look forward to seeking more of your fantastic post. Also, I have shared your site in my social networks!
Комментарии
Truly helpful and superb structure of articles, now that’s terrific.
Also visit my blog post :: wartrol reviews:
Spot on with this write-up, I seriously think this website needs a lot more attention. I'll probably be
back again to read through more, thanks for the info!
Here is my web site :: BHW:
Good day! Would you mind if I share your blog with my
facebook group? There's a lot of people that I think
would really appreciate your content. Please let me know.
Cheers
Feel free to visit my web blog jailbait:
Hi there, just turned into aware of your weblog via Google, and found
that it's truly informative. I'm gonna watch out for brussels.
I will appreciate for those who continue this in future.
Numerous other people will probably be benefited from your writing.
Cheers!
My web site; по ссылке:
Hi, Neat post. There is a problem together with your site in internet
explorer, would test this? IE still is the marketplace chief
and a large component of folks will omit your fantastic writing because of this problem.
My page digestive system, Eloise:
This is the perfect web site for anyone who wishes to understand this topic.
You know so much its almost hard to argue with you (not that I actually will need to?HaHa).
You certainly put a brand new spin on a
topic that's been discussed for years. Great stuff, just excellent!
Also visit my web site painful little toe -
I love what you guys are usually up too. Such clever work and exposure!
Keep up the amazing works guys I've included you guys to blogroll.
Also visit my web blog: manicure:
Wonderful blog! I found it while searching on Yahoo News.
Do you have any suggestions foot
pain on top of foot:
I've been trying for a while but I never seem to get there!
Thanks
Hello there! This post could not be written much better!
Looking at this post reminds me of my previous roommate!
He continually kept talking about this. I will send this article to him.
Pretty sure he'll have a good read. Thank you for sharing!
Here is my web-site:
Hiring a professional website designer isn't cheap.
my page :: web design services pricing:
I go to ѕee daily some web sites and websites
t᧐ read articles, Ьut thіѕ blog presеnts quality based cоntent.
Check out my blog - mezo:
We are a gaggle off voluynteers and starting a brand new scheme in our
community. Your site provkded us with useful information to work on. You've done an impressive process and our entire neighborhood will probably be grateful tto you.
my website buy lumigan eyelash growth:
Now tap or click on the Choose Folders button.
Here is my web site - creatic5.o2swit ch.net:
Hi there, I discovered your web site by way of
Google while searching for a similar matter, your site got here up, it seems
to be good. I've bookmarked it in mmy google bookmarks.
Hello there, simply become aware of your blog via Google, and found that
it's really informative. I'm gonna be careful for brussels.
I'll be grateful in the event you continue this in future.
A lot of other folks will likely be benefited out of your
writing. Cheers!
My blog :: Sally Hussin:
Fantastic items from you, man. I have remember your stuff previous to and
you are simply extremely fantastic. I actually luke what you've got here,
certainly like what you're saying and the way in which you are saying it.
You are making it enjoyable and you continue to care for to stay it sensible.
I can't wait to learn far more from you. That is actually a
tremendous site.
Look into my blog Hussin Ahmed:
My coder is trying to convince me to move to .net from PHP.
I have always disliked the idea because of the expenses.
But he's tryiong none the less. I've been using WordPress on several websites for about a year and am worried about
switching to another platform. I have heard very good things about blogengine.net.
Is there a way I can transfer all my wordpress content into it?
Any kind of help would be really appreciated!
Here is my blog Manar Ali:
This is very interesting, You're a very skilled blogger.
I have joined your rss feed and look forward to seeking more of
your fantastic post. Also, I have shared your site in my social networks!
Also visit my homepage - chocolate:
This article will help the internet users for setting up new web site or even a weblog from start to end.
Here is my web page - choc: